Capture & dictation
Recording your screen
Record a region, a window or a whole screen, with your voice and your PC's sound, as an MP4 that plays anywhere. There's no time limit and no watermark.
Starting a recording
Any of these work:
- Press Alt+S, select an area, window or screen, check the Microphone, System audio and Webcam toggles in the toolbar, and click Record video.
- Open the Screen page and click Record. Pick an area, window or screen and recording starts straight away (Choose an area, a window or a screen. Press Esc to cancel.), with your microphone on, system audio as set on the page, and the webcam bubble if it's showing.
- Right-click the tray icon and choose Record screen.
A video records one screen at a time. If your selection crosses onto another screen, the toolbar says Video records one screen at a time. Make the selection fit on one screen.
A 3-2-1 countdown appears over the area first. Click it to start at once, or press Esc to cancel. You can turn the countdown off in Settings.
The Screen page
Before you record, the Screen page lets you set up:
- Audio: Microphone (Uses the microphone chosen in Settings) with a Test button: Mic is working, or Is your mic muted? No sound was detected in 3 seconds. The test also runs once by itself the first time you open the page. System audio records what your PC plays (calls, videos, sounds).
- Webcam: Show webcam bubble puts your camera on screen, so it's in the recording. Background: Normal or Blur. See Webcam.
- Quality: Resolution (720p, 1080p or Source (up to 4K)) and Frame rate (15, 30 or 60 FPS). The default is 1080p at 30 FPS. 60 FPS makes much larger files.
Your microphone and system audio are mixed into one soundtrack. While you speak, ScreenTray lowers the system audio so your voice stays clear, and reduces background noise on the mic; both are settings.
While recording
A small control bar sits just below the area you're recording (it's never in the recording). In its full form it shows the elapsed time, live Mic and System audio meters, and buttons to Pause/Resume, Stop, turn the Microphone and Webcam on or off, and Discard (it asks Discard? first). You can make it smaller (Minimal: time, Pause and Stop) or hide it (Hidden (hotkeys and tray only)) in Settings.
You can also control the recording from:
- Alt+Q to pause and resume, and Alt+S to stop.
- The Screen page, which shows Recording, Paused or Saving…, the time, the meters, and Pause, Stop, Mic on/Mic off, Webcam on/Webcam off and Discard.
- The tray menu: Pause recording/Resume recording, Stop recording and Microphone.
Pausing doesn't split the video: you get one continuous file.
After you stop
The recording is saved to your library as an MP4, and the post-capture card appears above the tray with Copy, Email, Trim, Open and more. Nothing steals focus from what you were doing. See Sending. To copy each new video to the clipboard automatically, turn on Copy videos to the clipboard automatically in Settings.
If ScreenTray is closed while you record (you quit, Windows signs out, or ScreenTray updates itself), the recording is stopped and saved first. If your PC crashes or loses power mid-recording, the video up to that moment is saved too: the next time ScreenTray starts it adds it to your library marked Recovered.
Recording quality and file size
- Encoder: Automatic (GPU if available) uses your graphics card to keep recording smooth; Software uses the processor only. Try Software if recordings come out glitchy.
- Highlight the cursor adds a halo around the pointer, and Show clicks shows a ripple on every click. Both are off by default.
- Recordings can be large. A 3-minute 1080p video is often too big to email; use Fit for email.
What usually goes wrong
- "There's less than 500 MB free on the drive that holds your library. Free up space to record." Free some space (the Library's Clean up helps) or move your library folder to a bigger drive.
- "Low disk space: Less than 2 GB free. Recording will stop at 500 MB." The bar shows Low disk. ScreenTray stops and saves the recording cleanly if space runs out (Recording stopped: the drive is almost full.).
- "A recording is already running." Only one recording runs at a time. Stop it first.
- "Recording couldn't start: the microphone or system audio couldn't be opened." Another app may have the microphone exclusively, or it's disabled in Windows. Check Settings ▸ Capture ▸ Microphone and Windows' microphone privacy settings.
- "Nothing was recorded." The recording was stopped before any video arrived. Try again.
- No sound from the microphone in the video. Click Test on the Screen page. If it says your mic may be muted, check the mic's mute switch and Settings ▸ Capture ▸ Microphone.
Screen recorder — see what it does
Record a region, a window or a whole monitor with your microphone and your PC's sound. GPU encoding keeps it smooth, there's no time limit, and the file is an ordinary MP4 that plays everywhere. Learn more about the Screen recorder.
Windows 10/11 (x64) · Free · No account
Don't have ScreenTray yet?
Free for Windows 10 and 11. Screenshots, recording and dictation, all on your PC.
Windows 10/11 (x64) · Free · No account